ALPS Develops and Commences Mass Production of “UGZZC-G Series” Bluetooth All In One Module with Antenna for Automotive Use
Built-in Antenna and Memory for More in an All In One Module
Duesseldorf, Germany, April 12, 2013 – ALPS has developed the “UGZZC–G Series” Bluetooth® All In One Module with Antenna for Automotive Use, which is ideal for wireless connections between automotive equipment – car audio systems in particular – and mobile devices. Mass production begins in April 2013.

Car navigation and audio systems have become essential for driving comfort. Besides navigation and music playback, these automotive infotainment systems can now perform a wide range of functions as support is increasingly provided for hands-free phone calls and due to enhanced interoperability with smartphones, portable music players and other mobile devices. This interoperability requires a wireless communication module, with data communication methods based on Bluetooth® technology currently being the most widely used.

Products that use Bluetooth®, a technology convenient for near-field communication in spaces like a vehicle cabin, require Bluetooth® SIG certification and certification specified in radio legislation in each country. The same certification has to be obtained also for the end equipment after the Bluetooth® module has been installed and with the antenna included, meaning an enormous amount of time and effort is spent on examination and testing. Furthermore, many car audio and other automotive systems have CPUs with low processing capability, creating large demand, when incorporating Bluetooth technology, for products like ALPS' All In One modules*, which contain a Bluetooth® protocol stack. There is also growing demand for modules with built-in antennas.

ALPS has responded by developing the UGZZC–G Series Bluetooth® All In One module for automotive use with a built-in antenna. Having incorporated the antenna and Bluetooth® protocol stack into the module, ALPS is responsible for obtaining for the module not only Bluetooth® certification but also certification required by radio legislation in relevant countries. The module also has a built-in serial flash memory enabling storage of up to 3,000 phone book data entries and incorporates sorting and other functions for managing that data, thereby helping to reduce the software development workload of equipment manufacturers. ALPS’ addition of a module integrating antenna, Bluetooth® protocol stack and memory to its current lineup of All In One modules helps to reduce the design, testing, software development and certification burden for end equipment.

RF and simulation technologies acquired by ALPS over the years were applied to optimize circuitry affecting antenna characteristics, allowing integration of the antenna into the module. Use of a pin header connection contributes to a smaller footprint within car audio systems while retaining wireless communication characteristics.

ALPS has produced more than 25 million automotive Bluetooth® All In One modules to date and the new UGZZC–G Series is part of additional efforts to step up commercialization of products that meet the needs of the market.

* All In One module:
A module containing lower (RF and baseband) through to upper (communication protocol) Bluetooth® layers to enable processing using Bluetooth®.

Features

Built-in Antenna and Memory for More in an All In One Module
  1. Antenna integration helps to reduce the antenna verification workload of equipment manufacturers
  2. Built-in serial flash ROM for phone book data storage (up to 3,000 entries)
  3. Smaller footprint with vertical mounting design
Principal Applications

Wireless communication between car audio or navigation systems and mobile devices
Other communication devices for automotive use

Specifications

Model: UGZZC–G Series
Dimensions (W × D × H): 29.0mm x 36.1mm x 8.0mm
Specification: Ver. 2.1 + EDR
Interface: UART
Frequency: 2402 – 2408MHz
Supply voltage: 3.3V
Transfer speed: 1 – 3Mbps
Operating temperature: -20 to +75°C

For more information on the new product please visit
www.alps.com/products/e/npv_product/130411_UGZZC/UGZZC_E.PDF
ALPS Electric Co., Ltd.
ALPS Electric (Tokyo: 6770) is a leading global manufacturer of high-quality electronic components for mobile devices, home electronics, vehicles and industrial equipment. With the philosophy of "Perfecting the Art of Electronics" ALPS Electric supplies over 40,000 different components to about 2,000 companies all over the world. For more information, visit www.alps.com.

ALPS ELECTRIC EUROPE GmbH, a subsidiary of ALPS Electric Co., Ltd., was established in 1979. Since 1989 the European Head Office has been located in Düsseldorf, where a team of specialists works in Sales, Marketing, and Product Engineering. The activities of our branch offices in Munich, Paris, Milton Keynes, Gothenburg, and our sales office in Milan are coordinated from Düsseldorf.
 
 
 
» Alps Alpine Europe
» Press Releases
» Press Release
Date: 12.04.2013 11:15
Number: 03/13 EN
» Press Photos

 Download der hochauflösenden Version...
UGZZC-G Series
» Contacts
ALPS ELECTRIC EUROPE GmbH
Tel.: +49 (0)211/ 59 77-0
Fax: +49 (0)211/ 59 77-146
Email: info@alps-europe.com
Internet : www.alps.com
» Contact Agency
MEXPERTS AG
Kurt Loeffler / Peter Gramenz
Tel.: +49 (0)89/ 89 73 61-0
Fax: +49 (0) 89 89 73 61-29
Email: kurt.loeffler@mexperts.de
Internet: www.mexperts.de
» More Press Releases
30.10.2024 14:00
Innovative products for sensor, HMI, energy management and IoT applications

11.10.2024 09:30
Alps Alpine Develops the World’s Smallest Class TACT Switch™

01.10.2024 10:00
Alps Alpine Appoints Sascha Kunzmann as New President of Alps Alpine Europe

22.05.2024 11:00
Alps Alpine at PCIM 2024 in Hall 5, Stand 423 – Sensors and ICs for Automotive Applications

27.02.2024 11:00
Alps Alpine Commences External Sales of ICs, Starting from a High-Sensitivity Capacitive Sensor IC