| 09.04.2024 10:00 |
Cooperation Between Vector Informatik and AbsInt Paves the Way for Autonomous Driving |
|
Stuttgart and Saarbrücken, GERMANY, 2024-04-09 – A key requirement for autonomous driving and x-by-wire systems is the correct timing of fail-operational systems. Coordinated software tools and close cooperation between Vector and AbsInt make it easier for ECU developers to analyze the Worst-Case Execution Time (WCET) of projects based on MICROSAR from Vector. This proves that the timing behavior of autonomous driving systems meets the strict safety standards and requirements. |
 |
|
| 06.03.2024 10:00 |
Vector Offers Dynamic Load Management in Charging Parks |
|
Stuttgart, GERMANY, 2024-03-06 – Vector Informatik is expanding its product portfolio in the field of e-mobility charging infrastructure with the vCharM.edge hardware. Operators of charging parks can use it to implement dynamic load management. This avoids expensive grid expansions and still guarantees full charging without expensive peak loads for all vehicles. |
|
|
| 12.02.2024 10:00 |
Vector Introduces New Configurable Test System for Charging Communication Tests |
|
Stuttgart, GERMANY, 2024-02-12 – Vector will be presenting its new product vCTS at this year's E-Mobility Symposium on February 27 in Stuttgart. The vCTS, short for Vector Charging Test System, is a modular test system for charging communications tests. vCTS offers both manufacturers and suppliers of electric vehicles and charging stations comprehensive conformity and interoperability tests to validate charging communication. |
|
|
| 01.02.2024 10:00 |
Vector Presents Version 22 of the CANape Measurement and Calibration Software |
|
Stuttgart, GERMANY, 2024-02-01 – With the current version 22, the CANape measurement and calibration software from Vector now supports protocols of new vehicle architectures with High Performance Computing Platforms (HPC) and zone ECUs. All data is also recorded in the Software Defined Vehicle (SDV) thanks to the support of the new protocols. Especially for ADAS/AD projects, new logging extensions offer data acquisition at up to 6 GByte/s. |
|
|
| 23.01.2024 10:00 |
Vector Introduces High Availability Embedded Software Enabling Dependable Automated Driving |
|
Stuttgart, GERMANY, 2024-01-23 – Vector now offers embedded software for ECUs that meets the highest safety requirements according to ISO 26262 and goes far beyond the usual market standards. The software ensures reliable operation and is therefore particularly suitable for autonomous driving and x-... |
|
|
| 16.01.2024 10:00 |
MultiGBASE-T1 - The Next Speed Level for Automotive Ethernet Interfaces |
|
Stuttgart, GERMANY, 2024-01-16 – Vector now supports the IEEE standards for Automotive Ethernet 2.5GBASE-T1, 5GBASE-T1 and 10GBASE-T1 in its VN5650 and VN5240 Automotive Ethernet interfaces. Users can configure the Vector Ethernet interfaces initially or simply extend their interfaces to MultiGBASE-T1 via new physical layer modules, facilitating simulation, analysis and tests for multi-gigabit applications. |
|
|
| |
««
«
1
2
3
4
5
»
»»
|
